- Out-of-Stock
Bravo Evolution is the mechanical key cutting machine for flat cylinder, vehicle and cruciform keys. It features three-sided clamps with knobs with dynamometric control system, mechanical tracer point with micrometric adjustment ring nut, and single speed cutter motor.
TECHNICAL DATA
Power supply | 230V-50/60 Hz |
Cutter motor | single phase and speed |
Cutter |
HSS (high speed steel) |
Cutter speed | 650 rpm |
Standard clamp | 3-sided clamp with dynamometric controlled knob |
Movements | on sintered, self-cleaning and self-lubricating bushings |
Carriage runs | 42 mm |
Dimensions | Width: 400 mm, Depth: 520 mm, Height: 400 mm |
Weight | 21,5 kg |
Smooth to handle carriage
Bravo Evolution features smooth and stable carriage movements. Thanks to the special internal mechanism, the plays while shifting the carriage are reduced to the minimum for precise key cutting operations.
Long-lasting structure
The bushings of the carriage shaft apply a technology used in the automotive industry and are covered with special oils that guarantee better sliding and resistance to wear. Their dust removing system hinders the intrusion of metal chippings while cutting for a longer life and more precise cutting results.
Easy calibration
The machine is equipped with a mechanical tracer point with micrometric adjustment ring nut (+/- 0,05 mm) for an accurate key cutting.
Practical and ergonomic work station
The carriage is released by pressing the red button between the clamps, which automatically activates the cutter for practical and safe key cutting operations. The ergonomic levers and knobs and the neon lamp in optimized position above the key cutting area ensure the work station is comfortable and well illuminated.
Three-sided clamps
The three-sided clamps are easy to twist off and turn over for accommodating a wide variety of keys. The patented dynamometric clamping system with controlled movement knobs ensure perfect key locking. The grip is balanced and secure to avoid damage to the key and to the clamp due to wrong or excessive pressure.
Clean working area
Bravo Evolution is unique in having two plexiglas covers that protect the user from metal chips and convey them into the pull-out swarf tray below the machine.
Dedicated brush start button
The de-burring brush is made of tynex and is turned on via the dedicated switch. It rotates at the same speed of the cutter (650 rpm).
Safety devices
The on-off switch features a safety cut-out for user protection. The machine needs to be manually re-started after a power interruption. The carriage cannot be released until the gauges have been disengaged for avoiding accidental damage.