Pilot samochodowy - HU106S23

EN CONFIGURING THE REMOTE:

(refer to fig. 1)
Frequency change:
(The default configuration is 433MHz)
- Press the buttons (1) and (2) simultaneously for 6 seconds
(the LED will flash once)
- Relase the button (2) and then press it again:
- 3 times to set 315MHz
- 4 times to set 433MHz
- Relase the button (1)

Remote control reset:
(The remote control will be reset to be reprogrammed on the
same or other vehicles)
- Press the buttons (1) and (3) simultanoeously for 6 seconds
(the LED will flash once)
- Relase the button (3) and then press it 5 times
- Relase the button (1)

Vehicle unlock options:
The remote control can be set so that only the diver's door is
unlocked when the unlock button is pressed:
- Press buttons (1) and (2) simultaneously for 6 seconds (the
Led will flash once)
- Relase the button (2) and then press it twice
- Relase the button (1)
When the remote control is configured in this way, to unlock all
the doors, press the unlock button twice.
To reset the unlocking of all the doors with a single press of the
button, repeat the procedure.

Key cutting information:
The remote control is supplied with a mechanical emergency
key compatible with vehicles producet between 1997 and 2015.
The original keys of most vehicles produced from 2010
onwards use a slighty shorter mechanical emergency key, to
perform the mechanical duplication correctly, both with manual
and electronic key cutting machines, it is necessary to select
both in the decoding and cutting phase, the appropriate cutting
system. We recommendet the use of cutter, feelers and specific
accessories for the HU106T and HU126T keys (fig. 2).

Replacing the battery (2x CR2025)
Follow the instructions (fig. 3).